Home   |   Introduction   |   Products   |   Warranty   |   LabTec®   |   Info   |   Tech Tips   |   Service Locations   |   Contact 

 

Independent Field Service Representative for Texas Refinery Corp. Brand Lubricants

TEXAS REFINERY CORPORATION
High Performance Lubricants

 

880 CROWN & CHASSIS® GREASE
  • EXCELLENT EXTREME PRESSURE QUALITIES
  • WATER RESISTANT
  • ADHESIVE AND COHESIVE
  • SAFE 
  • VERSATILE
  • STABLE

 

Excellent Extreme Pressure Qualities

The crown of a drilling rig is expected to support the weight of two to three miles of drill pipe, developing critical lubrication needs at contact areas. It's especially effective for this type of high pressure application. With a Timken OK Load rating of 100 pounds minimum 880 CROWN & CHASSIS® meets special lubrication needs, providing the ultimate in extreme pressure protection. It's excellent for use on ball joints and fifth wheels, which are constantly placed under heavy loads.
 

Water Resistant

Can be used in places where a standard grade grease washes off. Impervious to water, 880 CROWN & CHASSIS® stays put. The special water-resistant qualities keeps surfaces of marine-related equipment well lubricated, avoiding rusting, corroding, and seizing.

Exceptional lubricant for use in the trenching, construction and industry, standing up to even the adverse conditions encountered with water pump bearings.

The special tackiness additives make it a highly practical grease. Its ability to stay put not only reduces grease consumption, but also provides outstanding protection against metal-to-metal contact. It clings to metal, sealing out dust, moisture, rust and corrosion. In addition to creating a dust barrier, the adhesive and cohesive qualities allow it to resist balling up in front of a bearing shaft. These traits also help lubricate the complete shaft and bearing, avoiding dry spots.
 
 

Listen to what a typical user of 880 CROWN & CHASSIS® has to say:

"Prior to switching products we were replacing two sets of bearings every ship, at a cost of $1,500.00 each. Since we started using the grease we reduced bearing replacements to one set every six months. We average 2 ships a month, if you calculate this out we have saved $36,000 dollars. This does not even take into consideration the cost of downtime of our vessels".
                                                                  Steve Dillon
                                                                  Terminal Manager

 Reduces downtime, reduces grease being consumed and increases equipment longevity and greasing intervals.

Safe

 

Is acceptable for use in enclosed systems in such facilities as federally inspected meat and poultry packing plants. Where you have people and OSHA concerns this is the grease to use.
Versatile

Will safely handle most lubrication needs, whether the surface to be lubricated turns, slides, or has an oscillating motion. It can be used for all types of bearings - ball or roller, high or low speed, sealed or opened.

Adding to its versatility, Texas Refinery Corp. blended Polytetrafluoroethylene (PTFE) into the grease, adding extra protection by providing additional low friction, anti-stick, and non-corrosive characteristics.

It may safely be used for most applications. For consistent operating temperatures of more than 270° F., use PARAGON3000®, LITHPLEX®, MOLY LITHPLEX®, HI-TEMP® or MOLY HI-TEMP®. 

880 CROWN & CHASSIS®  is available in four NLGI Grades (weights): #00, #0,  #1 and #2.

Stable

Specially treated to resist oxidation, it resists changes in consistency and quality even when stored for long periods of time. Resists separation, has controlled oil bleeding, and under most conditions does not crack, harden, or become thin.

Even under the most severe of conditions and even after extended life 880 CROWN & CHASSIS® will not thin or thicken. It maintains it's original NGLI rating.

Print
 

 

 

 

TEXAS REFINERY CORPORATION
High Performance Lubricants
Specifications
 
 
880 CROWN & CHASSIS® GREASE
NLGI Consistency 
No. 2 Grade
No. 1 Grade
No. 0 Grade
No. 00 Grade
Penetration: Worked 60 Strokes  Control Range (ASTM D217-52T) 
265-295
310-340
355-385
400-430
Extreme Pressure by Timken OK Load Passing At
100 Pounds Min.
80 Pounds Min.
80 Pounds Min.
80 Pounds Min.
Color 
Red 
Red 
Red
Red
Texture 
Stringy
Stringy
Stringy
Stringy
Water Resistance
Excellent
Excellent
Excellent
Excellent
Water Washout @ 79° C (ASTM D-1264)
1.3%
     
Dropping Point, °F. 
310 Typical
310 Typical
310 Typical
310 Typical
Combination (ASTM D128-57)        
         % Soap 
10.0 Maximum 
6 - 8 
5 - 6
3 - 5
         % Filler
Trace 
Trace
Trace
Trace
         % Water 
None
None
None
None
Stability by Penetration . . 
  after 100,000 Stroke    Working (ASTM D217-52T)
30 dmm Max. Increase From W/60 Penetration 
30 dmm Max. Increase From W/60 Penetration
30 dmm Max. Increase From W/60 Penetration
30 dmm Max. Increase From W/60 Penetration
Unit Load, PSI
29,000
29,000
29,000
29,000
4 Ball EP Test (ASTM D-2596)
315 kg Weld Point
315 kg Weld Point
   
4 Ball Wear Test (ASTM D-2266)
.33 mm Scar Diameter
.33 mm Scar Diameter
   
Automotive Wheel Bearing by Leakage Tendencies
Pass
 N/A
N/A
N/A
(ASTM) D1263-52T
No Leakage No Varnish
N/A
N/A
N/A
Consistency at Various Temperatures by Unworked Penetration (ASTM D217-52T)        
         @ 0° F. 
190-210
240-265
285-310
335-355
         @ 77° F.
265-295
310-340
355-385
400-430
         @ 100° F.
280-300
335-355
390-410
445-465
Relative Pumpability @ 0° F., Grams
2.7
8.4
12.0
45.0
Oxidation of Grease by Bomb Test (ASTM D942)
Less than 5 PSI pressure drop for 500 hours
Excellent
 Less than 5 PSI pressure drop for 500 hours
Excellent
Less than 5 PSI pressure drop for 500 hours
Excellent
Less than 5 PSI pressure drop for 500 hours
Excellent
Pumpability in Hand Operated Grease Gun (ASTM D1092)
Slow at -5° F.
Slow at -15° F.
Slow at -20° F.
Slow at -30° F.
Product Code
#8455
#8453
#8452
#8450
Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).

880 CROWN & CHASSIS® is a registered trademark of Texas Refinery Corp.

Print

 

 

 

 

   

 

 

"There is a  principle which is a bar against all information, which is a proof against all argument, and which cannot fail to keep a man in everlasting ignorance.  That principle is condemnation before investigation."

- HERBERT SPENCER

April 27, 1820 – December 8, 1903

 

®

Independent Field Service Representative for Texas Refinery Corp. Brand Lubricants

TEXAS REFINERY CORPORATION

High Performance Lubricants

                                                                                       Green Since 1922

                                                

 

© 2Copyright © 2009  Matson Performance Group | All Rights Reserved

    Home   |   Introduction   |   Products   |   Warranty   |   LabTec®   |   Info   |   Tech Tips   |   Service Locations   |   Contact 
 

Georgia Manufacturers Representatives.